Frequently Asked Questions

Tattoos are balls of ink that are injected into the superficial layer of the skin. These balls of ink are then stored amongst immune cells where they get stuck and are too large to be carried away.
Extremely short nanosecond bursts of light energy penetrate the skin through the tattoo ink pigment leaving surrounding skin untouched. The laser passes beneath the first layer of the skin into the dermis (the second layer) where the ink molecules absorb the laser energy and are shattered into smaller pieces that are then absorbed into the blood stream. The body will then begin the process of harmlessly removing the ink through the lymphatic system which will take at least 6 weeks for the process to be successful. For this reason, treatments will be scheduled 6 weeks apart so we can allow for the body to naturally filter the ink.

Unfortunately not. Without waiting a minimum of 6 weeks you will not be allowing the body to naturally filter out the old shattered particles of ink. The tattoo will not be removed any faster and may cause damage or scarring to the tissue especially if it has not been given enough time to properly heal. We recommend a minimum of 6 weeks with up to 8 weeks being desirable for colour tattoos.

All our technicians at Think Again Laser Clinic are highly qualified in tattoo removal, laser equipment and safety. They are all government accredited Laser professionals, and have undertaken an additional ‘Skin Science for Laser Tattoo Removal’ course. We pride ourselves on our optimum levels of safety to ensure affective results are delivered to our clients. Since tattoo removal is all we do you can be assured we will provide the experience and expertise necessary to gain the very best results.

During treatment the tattoo will appear to have a white surface layer which is the first initial sign that the process is working. This is caused by the breaking down of tattoo pigment and the reaction to the laser, this colouring will subside within a couple of hours.
Immediately after treatment the surrounding skin is likely to show a red discoloration and a small amount of pinpoint bleeding may occur. The feeling can be compared to a mild sunburn where swelling and redness may last for one week.
Over the next few days a small amount of blistering may occur followed by a scab or thin crust, which should be left untouched to eventually fall off. Hindering a scab from dislodging naturally and removing it early may result in the development of a scar. The skin will remain red for a few days to a week or two and begin to heal on its own.
All of these reactions are a normal response to the removal process and the way in which the body begins to heal.

In almost all cases YES, however if the original tattoo has been covered multiple times this process may be more difficult. Some pigment lightening may result which will return to normal during the skins normal tanning process.
Tattoos which have already been treated with incapable machines may also provide a more difficult and longer process to achieve complete removal. This is because the energy of their laser could have caused a reaction to the tattoo pigment creating a ‘glue’ type effect in the deep layers of the skin.
White tattoos reflect the laser light and do not respond to laser treatment, preventing the skin to return to its original state. It is important to advise your laser specialist if your tattoo contains any layers of white ink as the removal process must be handled in a different way.

In almost ALL cases YES. Using the Quanta Q Plus C system you will be treated by the only machine in the world which truly uses the required 3 dedicated wavelengths to affectively treat ALL colours of tattoos (except white). Your laser clinician will be able to provide a clear expectation at consultation.
All tattoos can be treated using the Quanta Q-Plus C. There are other systems used to treat the whole range of colours of tattoos which claim to be effective, but in reality cannot affectively treat hard to remove colours due to there not being a dedicated RUBY laser at 694 nm.
If your technician is changing handpieces during the treatment process, the reality is that they do not have the required Ruby 694nm laser and lightening at best can only be expected.
Ask your current technician if they have the dedicated 694nm wavelength, if their answer is no, they cannot achieve the desired results for all tattoos.
Results may vary if the tattoo has already been treated for laser tattoo removal or any other removal procedure.

The number of treatments required for each tattoo varies. Generally the average required number of treatments varies from 5-10, with the average being 7. The factors which determine the number of treatments required for complete removal are:

  • The colours involved in the ink – different colours require a different setting on the laser to effectively control the power of the laser energy and remove the ink. Complex multicolour designs will take more time than a simple one colour design.
  • Location on the body – parts of the body will disperse, filter and remove the ink more quickly than others. The feet and hands will take longer to achieve results
  • The type and depth of ink used
  • The age of the tattoo
  • The patients reaction to the treatment (immune response)
  • Skin Tone – Lighter skin will respond more efficiently than darker tones
  • Whether the client has previously been treated by another laser system

Come into our clinic today for an obligation, FREE consultation and trial test patch. In person we can provide a more specific and expert assessment of your individual tattoo.

Your treatment at Think Again Laser Clinic is a holistic procedure. You will be supplied with a detailed post treatment information sheet to ensure you have the tools to give your skin the BEST chances of returning to its natural form and ensuring you are well prepared to treat your tattoo safely and effectively.
Our advice during the post treatment phase does not end after each session. Our specialists are also available to provide support at any time by phone or make an appointment to discuss in person.
Post treatment care is vital to ensure the treated area heals effectively to achieve your desired results. The following steps should be carefully executed:

• Apply the recommended healing cream to the treatment area
• Avoid direct sun exposure during the entire healing process and ensure spf 50+ sun cream is applied and/or clothing is covering the area (this includes tanning beds).
• Showering is acceptable after 24 hours, however it is advised that you avoid prolonged exposure to water and avoid excessive heat in the skin for 48 – 72hours post treatment. This includes direct water pressure from a shower, exercise, swimming pools, using a bath etc. Excess moisture will hinder the wound/scab from healing.
• Avoid injury to the area
• Avoid scratching, picking or touching the direct or surrounding area
• Cold packs or a cool cloth may be applied if further discomfort persists

The mechanism of tattoo removal uses non-ionising radiation, which has no detrimental effect on the molecular structure of DNA.
Lasers used in tattoo removal have been in use for many years and in this time there has been no recorded case of increased development of cancers in the group treated.

No we do not treat cosmetic tattoos. The ink used in these tattoos react much differently to the laser and have an unpredictable outcome.

A wavelength will determine how deep the laser light will penetrate the skin. However not all lasers are capable of producing each necessary wavelength needed to remove certain colours of ink. Since coloured ink will naturally settle in different depths of the skin, the capability of these settings are essential. Black settles the deepest which will require a 1064 wavelength; red, yellow, pink and orange settles the highest in the skin requiring a 532 wavelength and blues and greens will settle somewhere in the middle needing a 694 wavelength. Each wavelength penetrates different depths of the skin, ultimately targeting different colours. However, if the laser system does not have the available energy or sufficient power the desired result will not be achieved.

wavelength

The most commonly used laser systems on the market lack the ability to switch between wavelengths. Our Quanta Q-Plus C is the only system in the world, which has two lasers in the one system and can utilise three wavelengths. The ND:YAG & Ruby wavelength which directly targets blue and green tattoo ink.

For starters, the makers of Picosure (Cynosure) are currently the defendants in a class action lawsuit, put simply the Picosure is an excellent marketing campaign and very little else. There are a group of users of this laser system who are holding the producer Cynosure accountable for false and misleading claims made about the effectiveness of this system for tattoo removal. More details can be found at http://cookcountyrecord.com/stories/510625065-dermatologist-claims-laser-tattoo-removal-tool-is-fraud-brings-class-action-vs-mass-based-maker

There is often quite a lot of hype regarding the PicoSure which is largely due to it’s ‘world first’ media presence and “it style” impression.
It is important to know the effectiveness of the machine is determined by physics, nothing else.
Taking into account the different depths within the skin where coloured ink resides, research has proven multiple wavelengths are required for effective tattoo removal. Black settles the deepest which will require a ND:YAG 1064 wavelength; red, yellow, pink and orange settles the highest in the skin requiring a 532 wavelength and blues and greens will settle somewhere in the middle needing a 694 wavelength.

The PicoSure laser only offers one wavelength (755). If you imagine the depth of your skin being in numerical order and taking into account the depths each colour will sit, the PicoSure 755 wavelength will pass straight through any red, yellow, pink or orange along with any blues or green and also fall short of reaching black or darker colours.

Our laser is of Gold Standard. We use the most powerful, effective and safe laser on the market to guarantee results to our customers. Through the power of physics our laser will deliver results in lightening or completely removing your multi coloured tattoos.
The majority of Q-switch laser machines available in the market consist of only one laser i.e. Nd:Yag which can deliver two wavelengths 1064 nm (targeting black) and 532 nm (for targeting red), but to remove green colours it is impossible.
Our machine is the only true 3 wavelength laser in the world, consisting also of the Ruby. It is quite common for some machines in the market to have a filter in the hand piece in order to replicate and produce a wavelength near to a Ruby (694). By doing this they deliver promises that they can treat green and blue inks but in reality it will not produce results because the filter reduces the output energy by half.  Our Q-switched laser is a pure  one pulse system which fires at just six nanoseconds, unlike many machines which have to be increased in power and will fire two pulses of  12 nanoseconds. This is too much exposure to the skin and is likely to cause damage to the superficial layers. Our Q-switch laser is the safest way to perform your tattoo removal treatment.

It is important upon consultation that our laser specialists assess your tattoo and provide you with the most transparent outcome. They will spend around 45minutes to 1 hour with you as they explain the tattoo removal process, diagnose your skin and answer any questions you have. Any further treatments, dependant on the size of the tattoo will be completed anywhere from 30 seconds to a couple of minutes. Please then allow 10-15minutes to discuss and record the progress of your treatment.

At Think Again Laser Clinic we are constantly creating new ways for you to save on treatments. Make sure to visit our website and follow our social media pages to keep up to date with our latest promotions and competitions. We offer our clients a customised discount for the treatment of multiple tattoos and can guarantee competitive pricing for a high quality service. If you do choose to pre-purchase four treatments or more we would be happy to offer you a 15% discount.

Yes! With precision our machine allows for as much or as little as you would like removed. Our hand pieces cater for the smallest of spot sizes starting from 2mm in order to target particular areas or sections to be removed. The Quanta Q-Plus C uses a square laser beam which allows for even laser distribution in the tissue minimising any overlap of the tattoo.
squarebeam

During tattoo removal a client can expect to feel a level of discomfort however pain is an individual experience. Most may compare the pain to a flick from an elastic band. At Think Again Laser Clinic we use a dedicated pain reducing system; the Koolio. This is an optimal cooling system used on the area before, during and after treatment which produces a stream of chilled air at -40 degrees Celsius. The stream of air minimises pain and thermal injury to the patient and unlike other cooling methods such as ice packs or other contact cooling; our machine can be applied during the treatment process without interrupting the laser. There is no need for the patient to experience unnecessary discomfort during treatment and this is why we use the leading cooling system.
We offer optional anaesthetic creams in the clinic (they can also be purchased at a chemist), which can be used in conjunction with the Koolio to further reduce the level of discomfort experienced. These must however be applied one hour prior to your scheduled treatment.

Google+